(310) 956-3641

Call in for the best deals!

Sound Shields VDS-5-K 5.5 foot Tall 10 foot Wide 5 Section Acrylic Shield System added to cart!

13-24 of 42 Products

View All
Page
2
of 4
418

Sound Shields VDS-7SPS 7-panel Isolation Booth

7-panel Isolation Booth with Acrylic Drum Shields, Insulated Dampers, Lid, Support Beams, and Fan

$ 2868.82
417

Sound Shields VDS-4X5-K 4 foot Tall 10 foot Wide 5-section Acrylic Shield System

5-panel Drum Shield (4'H x 10'W) with "Mouse Hole" Cable Cutouts

$ 469.99
416

Sound Shields Isolation Booth Lid Pack – VDS-RS1-K

2 Clipped Roof Sound Dampers (Left and Right), 1 Sound Damper, and 1 Adjustable Support Rod - VDS-RS1-K

$ 388.96
414

Sound Shields VDS-3-K 5.5 foot Tall 6 foot Wide 3-section Acrylic Shield System

3-panel Drum Shield (5.5'H x 6'W) with "Mouse Hole" Cable Cutouts

$ 402.99
413

Sound Shields VDS51-K 5.5 foot Tall 2-foot Wide Single Acrylic Panel

1 x Drum Shield Panel (5.5' H x 2' W) with "Mouse Hole" Cable Cutout

$ 139.99
412

Sound Shields Large Isolation Booth Lid Pack – VDS-RS2-K

2 Clipped Roof Sound Dampers (Left and Right), 2 Sound Dampers, and 2 Adjustable Support Rods  

$ 514.95
411

Sound Shields Adjustable Metal Lid Support – VAMLS-1

Metal Support Beam for Drum Booth Lid with 60-96" Adjustable Height

$ 29.99
410

Sound Shields 64 inch VDSH-64HD Friction Hinge for non grooved panels

64" Drum Shield Hinge for Non-grooved Acrylic Panels

$ 14.99
409

Sound Shields VDS-4X3-K 4 foot Tall 6 foot Wide 3-section Acrylic Shield System

3-panel Drum Shield (4'H x 6'W) with "Mouse Hole" Cable Cutouts  

$ 329.99
408

Sound Shields VDS-5-78-K 78-inch Tall 5-section Acrylic Shield System

5-panel Drum Shield (78" H) with "Mouse Hole" Cable Cutouts

$ 679.99
407

Sound Shields VDS-6SPS 6-panel Isolation Booth

6-panel Isolation Booth with Acrylic Drum Shields, Insulated Dampers, Lid, Support Beam, and Fan

$ 2388.86
406

Sound Shields Roof Sound Damper – VSDP-1266-1 – 12-inch x 66-inch

12" x 66" Insulated Sound Damper Panel

$ 95.99
X
434

Sound Shields VDS-6-K 5.5 foot Tall 12 foot Wide 6 Section Acrylic Shield System

6-panel Acrylic Drum Shield with Cable Cutouts

You can help control drum bleed in a stage, studio, or worship environment using the VDS-6-K drum shield by Sound Shields. This 6-piece drum shield is made from interlocking 5-1/2'H x 2'W panels of clear acrylic to deflect mid- to high-frequency drum content (snare drums, cymbals, etc) in a performance setting. This helps diffuse drum sounds throughout a room so they're less direct when they meet your listeners' ears. The VDS-6-K can also dramatically improve isolation when used to keep drum sounds from entering vocal microphones in front of the kit, resulting in a cleaner mix overall. Each panel of the Sound Shields VDS-6-K drum shield features "mouse holes" for running mic cables through and giving clearance to stand legs. We've found that Sound Shields drum shields also come in handy for taming loud guitar amps and dispersing horn sections onstage or up on the platform.

Sound Shields VDS-6-K 6-panel Drum Shield Features:

  • Helps control instrument bleed in a performance setting
  • Results in improved isolation and a cleaner mix overall
  • Great for drums, amps, horns, and other loud sources
  • Perfect for stage, studio, and worship settings
  • 6 interlocking acrylic panels, each 5-1/2'H x 2'W
  • Deflects high- and mid-frequency content from snares and cymbals away from listeners and vocal mics
  • Mouse holes are perfect for running mic cables and clearing stands
 
$ 776.99

Quantity

X
433

Sound Shields VDS-22DIA-K 22 inch Cymbal Shield with 1/2 inch Hole – CYMBAL AND STAND NOT INCLUDED

Stand-mountable 22" Clear Acrylic Sound Barrier

If you need a little help spot-treating directional cymbals, horns, or combo amps in a live ensemble setting, the VDS-22DIA-K 22" Cymbal Shield from Sound Shields makes a noticeable difference. This 22" clear acrylic disc diffuses and deflects high-frequency content without obscuring sight lines. This means your players stay visible and those piercing crashes, trumpet stabs, and power chords stay out of your vocal mics. What's really great is that the VDS-22DIA-K mounts directly to an open cymbal stand or boom arm. So for drum set applications, the Sound Shields Cymbal Shield remains virtually invisible — just mount an additional cymbal boom off your stand, mount the Cymbal Shield, and you're golden. Looking for reduced stage bleed and a cleaner mix overall? You'll want to check out the Sound Shields VDS-22DIA-K Cymbal Shield.

Sound Shields VDS-22DIA-K 22" Cymbal Shield Features:

  • 22" stand-mountable clear acrylic sound barrier
  • Helps diffuse cymbal sounds
  • Also helps spot-control amps and horns
  • Results in improved isolation and a cleaner mix overall
  • 1/2" center mounting hole — mounts directly to an open cymbal stand or boom arm
  • Great for stage, studio, and worship settings
$ 40.99

Quantity

X
432

Sound Shields VDS-5-K 5.5 foot Tall 10 foot Wide 5 Section Acrylic Shield System

5-panel Acrylic Drum Shield with Cable Cutouts

You can help control drum bleed in a stage, studio, or worship environment using the VDS-5-K drum shield by Sound Shields. This 5-piece drum shield is made from interlocking 5-1/2'H x 2'W panels of clear acrylic to deflect mid to high-frequency drum content (snare drums, cymbals, etc) in a performance setting. This helps diffuse drum sounds throughout a room so they're less direct when they meet your listeners' ears. The VDS-5-K can also dramatically improve isolation when used to keep drum sounds from entering vocal microphones in front of the kit, resulting in a cleaner mix overall. Each panel of the Sound Shields VDS-5-K drum shield features "mouse holes" for running mic cables through and giving clearance to stand legs. We've found that Sound Shields drum shields also come in handy for taming loud guitar amps and dispersing horn sections onstage or up on the platform. If unwanted bleed is ruining your sound, the Sound Shields VDS-5-K drum shield can make a world of difference.

Sound Shields VDS-5-K 5-panel Drum Shield Features:

  • Helps control instrument bleed in a performance setting
  • Results in improved isolation and a cleaner mix overall
  • Great for drums, amps, horns, and other loud sources
  • Perfect for stage, studio, and worship settings
  • 5 interlocking acrylic panels, each 5-1/2'H x 2'W
  • Deflects high- and mid-frequency content from snares and cymbals away from listeners and vocal mics
  • Mouse holes are perfect for running mic cables and clearing stands
$ 645.99

Quantity

X
431

Sound Shields VDS-6-78-K 78-inch Tall 6-section Acrylic Shield System

6-panel Acrylic Drum Shield with Cable Cutouts

You can help control drum bleed in a stage, studio, or worship environment using the VDS-6-78-K drum shield by Sound Shields. This 6-piece drum shield is made from interlocking six 78-inch high panels of clear acrylic to deflect mid to high-frequency drum content (snare drums, cymbals, etc) in a performance setting. This helps diffuse drum sounds throughout a room so they're less direct when they meet your listeners' ears. The VDS-6-78-K can also dramatically improve isolation when used to keep drum sounds from entering vocal microphones in front of the kit, resulting in a cleaner mix overall. Each panel of the Sound Shields VDS-6-78-K drum shield features "mouse holes" for running mic cables through and giving clearance to stand legs. We've found that Sound Shields drum shields also come in handy for taming loud guitar amps and dispersing horn sections onstage or up on the platform. If unwanted bleed is ruining your sound, the Sound Shields VDS-6-78-K drum shield can make a world of difference.

Sound Shields VDS-6-78-K 6-panel Drum Shield Features:

  • Helps control instrument bleed in a performance setting
  • Results in improved isolation and a cleaner mix overall
  • Great for drums, amps, horns, and other loud sources
  • Perfect for stage, studio, and worship settings
  • 6 interlocking acrylic panels, each measuring 78 inches high
  • Deflects high- and mid-frequency content from snares and cymbals away from listeners and vocal mics
  • Mouse holes are perfect for running mic cables and clearing stands
$ 799.99

Quantity

X
430

Sound Shields VDS-4X4-K 4 foot Tall 8 foot Wide 4-section Acrylic Shield System

4-panel Acrylic Drum Shield with Cable Cutouts

You can help control drum bleed in a stage, studio, or worship environment using the VDS-4X4-K drum shield by Sound Shields. This 4-piece drum shield is made from interlocking 4-foot x 2-foot (height x width) panels of clear acrylic. These panels effectively deflect mid- to high-frequency drum content from snare drums, cymbals, and hand percussion in a performance setting, helping to diffuse drum sounds throughout a room so they're less direct when they meet your listeners' ears. The VDS-4X4-K can also dramatically improve isolation when used to keep drum sounds from entering vocal microphones in front of the kit, resulting in a cleaner overall mix. Each panel of the Sound Shields VDS-4X4-K drum shield features "mouse holes" for running mic cables through and giving clearance to stand legs. We've found that Sound Shields drum shields also come in handy for taming loud guitar amps and dispersing horn sections onstage or up on the platform. If unwanted bleed is tarnishing your sound, the Sound Shields VDS-4X4-K drum shield can make a world of difference.

Sound Shields VDS-4X4-K 4-panel Drum Shield Features:

  • Helps control instrument bleed in a performance setting
  • Results in improved isolation and a cleaner mix overall
  • Great for drums, amps, horns, and other loud sources
  • Perfect for stage, studio, and worship settings
  • 4 interlocking acrylic panels, each 4 feet tall x 2 feet wide
  • Deflects high- and mid-frequency content from snares and cymbals away from listeners and vocal mics
  • Mouse holes are perfect for running mic cables and clearing stands
$ 374.99

Quantity

X
428

Sound Shields Sound Damper – VSDP-2466-1 – 24-inch x 66-inch

Premium Sound Insulation from Sound Shields

If you’re in need of more sound insulation for your drum shield setup, the Sound Damper from Sound Shields will do the trick! This damper is constructed from heavy sound-insulating material that absorbs vibrations and sound waves with ease to keep the noise from your kit to a minimum. This single damper panel measures 24 inches x 66 inches and can be the perfect tool for expanding your setup.

Sound Shields Sound Damper Features:

  • Ideal as an insulation panel for your drum shield
  • Single panel measuring 24 inches x 66 inches (1 per box)
  • Made of heavy sound-insulating material to dampen drum noise
$ 116.99

Quantity

X
427

Sound Shields VDS-7-78-K 78-inch Tall 7-section Acrylic Shield System

7-panel Acrylic Drum Shield with Cable Cutouts

You can help control drum bleed in a stage, studio, or worship environment using the VDS-7-78-K drum shield by Sound Shields. This 7-piece drum shield is made from interlocking seven 78-inch panels of clear acrylic to deflect mid- to high-frequency drum content (snare drums, cymbals, etc) in a performance setting. This helps diffuse drum sounds throughout a room so they're less direct when they meet your listeners' ears. The VDS-7-78-K can also dramatically improve isolation when used to keep drum sounds from entering vocal microphones in front of the kit, resulting in a cleaner mix overall. Each panel of the Sound Shields VDS-7-78-K drum shield features "mouse holes" for running mic cables through and giving clearance to stand legs. We've found that Sound Shields drum shields also come in handy for taming loud guitar amps and dispersing horn sections onstage or up on the platform. If unwanted bleed is ruining your sound, the Sound Shields VDS-7-78-K drum shield can make a world of difference.

Sound Shields VDS-7-78-K 7-panel Drum Shield Features:

  • Helps control instrument bleed in a performance setting
  • Results in improved isolation and a cleaner mix overall
  • Great for drums, amps, horns, and other loud sources
  • Perfect for stage, studio, and worship settings
  • 7 interlocking acrylic panels, each measuring 78 inches high
  • Deflects high- and mid-frequency content from snares and cymbals away from listeners and vocal mics
  • Mouse holes are perfect for running mic cables and clearing stands
$ 949.99

Quantity

X
426

Sound Shields Left Clipped Roof Sound Damper – VSDP-2466L – 24-inch x 66-inch

Premium Sound Insulation from Sound Shields

If you’re in need of more sound insulation for your drum shield setup, the Sound Damper from Sound Shields will do the trick! This damper is constructed from heavy sound-insulating material that absorbs vibrations and sound waves with ease to keep the noise from your kit to a minimum. This single left-clipped roof damper panel measures 24 inches x 66 inches and can be the perfect tool for containing your isolation booth's noise level.

Sound Shields Sound Damper Features:

  • Ideal as a roof damper panel for your drum shield
  • Single left clipped panel measuring 24 inches x 66 inches (1 per box)
  • Made of heavy sound-insulating material to dampen drum noise
$ 120.99

Quantity

X
425

Sound Shields Right Clipped Roof Sound Damper – VSDP-2466R – 24-inch x 66-inch

Premium Sound Insulation from Sound Shields

If you’re in need of more sound insulation for your drum shield setup, the Sound Damper from Sound Shields will do the trick! This damper is constructed from heavy sound-insulating material that absorbs vibrations and sound waves with ease to keep the noise from your kit to a minimum. This single right-clipped roof damper panel measures 24 inches x 66 inches and can be the perfect tool for containing your isolation booth's noise level.

Sound Shields Sound Damper Features:

  • Ideal as a roof damper panel for your drum shield
  • Single panel measuring 24 inches x 66 inches (1 per box)
  • Made of heavy sound-insulating material to dampen drum noise
$ 120.99

Quantity

X
422

Sound Shields VDS-7SPS-78 7-panel Isolation Booth with 78-inch Panels

Versatile Isolation Booth from Sound Shields

Capturing those pure, undisturbed sounds of your instrument has never been easier, thanks to Sound Shields. Our professional-grade Isolation Booths are designed to not only control instrument projection levels in the studio, but also preserve all the tones that make your tracks unique when recording — all while eliminating pesky studio rattle and buzz. They work so well because Sound Shields uses high-quality materials to get the job done including custom-cut interlocking acrylic paneling with mouse hole cable cutouts and heavily insulated sound dampers along the walls and roof. And the best part is that Sound Shields offers a variety of different Isolation Booth options, with varying panel and damper combinations to cater to your setup. From tracking drums to guitar amps and vocals, you’ll be amazed by the versatility of your booth.

Sound Shields VDS-7SPS-78 7-panel Isolation Booth Features:

  • 1 VDS-7-78-K 7-panel Acrylic Drum Shield (78- inches high)
  • 3 VSDP-2466X2-1 Rear Sound Joined Dampers (24-inch x 66-inch)
  • 1 VSDP-2466L and VSDP-2466R Roof Sound Damper Clipped Left and Right (both 24-inch x 66-inch)
  • 1 VSDP-2466-1 Sound Damper (24-inch x 66-inch)
  • 1 VSDP-1266-1 Roof Sound Damper (12-inch x 66-inch)
  • 7 VSDP-2224-1 Sound Dampers (22-inch x 24-inch)
  • 1 VDS-FAN Clip-on Fan
  • 1 VAMLS-2 Adjustable Metal Lid Supports (60–96 inches)
  • Perfect for studio settings, and recording drums, amplifiers, and vocals
  • Results in improved isolation, tone preservation, and a cleaner mix overall
  • Heavily insulated dampers keep excess noise to a minimum
  • Deflects high- and mid-frequency content from snares and cymbals
  • Mouse holes are perfect for running mic cables
$ 2579.80

Quantity

X
421

Sound Shields VDS-7-K 5.5 foot Tall 14 foot Wide 7 Section Acrylic Shield System

7-panel Acrylic Drum Shield with Cable Cutouts

You can help control drum bleed in a stage, studio, or worship environment using the VDS-7-K drum shield by Sound Shields. This 7-piece drum shield is made from interlocking 5-1/2'H x 2'W panels of clear acrylic to deflect mid to high-frequency drum content (snare drums, cymbals, etc) in a performance setting. This helps diffuse drum sounds throughout a room so they're less direct when they meet your listeners' ears. The VDS-7-K can also dramatically improve isolation when used to keep drum sounds from entering vocal microphones in front of the kit, resulting in a cleaner mix overall. Each panel of the Sound Shields VDS-7-K drum shield features "mouse holes" for running mic cables through and giving clearance to stand legs. We've found that Sound Shields drum shields also come in handy for taming loud guitar amps and dispersing horn sections onstage or up on the platform. If unwanted bleed is ruining your sound, the Sound Shields VDS-7-K drum shield can make a world of difference.

Sound Shields VDS-7-K 7-panel Drum Shield Features:

  • Helps control instrument bleed in a performance setting
  • Results in improved isolation and a cleaner mix overall
  • Great for drums, amps, horns, and other loud sources
  • Perfect for stage, studio, and worship settings
  • 7 interlocking acrylic panels, each 5-1/2'H x 2'W
  • Deflects high- and mid-frequency content from snares and cymbals away from listeners and vocal mics
  • Mouse holes are perfect for running mic cables and clearing stands
$ 928.99

Quantity

X
419

Sound Shields VDS-4-K 5.5 foot Tall 8 foot Wide 4 Section Acrylic Shield System

4-panel Acrylic Drum Shield with Cable Cutouts

You can help control drum bleed in a stage, studio, or worship environment using the VDS-4-K drum shield by Sound Shields. This 4-piece drum shield is made from interlocking 5-1/2 feet x 2 feet panels of clear acrylic to deflect mid to high-frequency drum content (snare drums, cymbals, etc) in a performance setting. This helps diffuse drum sounds throughout a room so they’re less direct when they meet your listeners’ ears. The VDS-4-K can also dramatically improve isolation when used to keep drum sounds from entering vocal microphones in front of the kit, resulting in a cleaner mix overall. Each panel of the Sound Shields VDS-4-K drum shield features “mouse holes” for running mic cables through and giving clearance to stand legs. We’ve found that Sound Shields drum shields also come in handy for taming loud guitar amps and dispersing horn sections onstage or up on the platform. If unwanted bleed is ruining your sound, the Sound Shields VDS-4-K drum shield can make a world of difference.

Sound Shields VDS-4-K 4-panel Drum Shield Features:

  • Helps control instrument bleed in a performance setting
  • Results in improved isolation and a cleaner mix overall
  • Great for drums, amps, horns, and other loud sources
  • Perfect for stage, studio, and worship settings
  • 4 interlocking acrylic panels, each 5-1/2 feet (height) x 2 feet (width)
  • Deflects high- and mid-frequency content from snares and cymbals away from listeners and vocal mics
  • Mouse holes are perfect for running mic cables and clearing stands
$ 533.99

Quantity

X
418

Sound Shields VDS-7SPS 7-panel Isolation Booth

Versatile Isolation Booth from Sound Shields

Capturing those pure, undisturbed sounds of your instrument has never been easier, thanks to Sound Shields. Our professional-grade Isolation Booths are designed to not only control instrument projection levels in the studio, but also preserve all the tones that make your tracks unique when recording — all while eliminating pesky studio rattle and buzz. They work so well because Sound Shields uses high-quality materials to get the job done including custom-cut interlocking acrylic paneling with mouse hole cable cutouts and heavily insulated sound dampers along the walls and roof. And the best part is that Sound Shields offers a variety of different Isolation Booth options, with varying panel and damper combinations to cater to your setup. From tracking drums to guitar amps and vocals, you’ll be amazed by the versatility of your booth.

Sound Shields VDS7SPS 7-panel Isolation Booth Features:

  • 1 VDS-7-K 7-panel Acrylic Drum Shield
  • 1 VDSX122-7 7-panel Drum Extension (14-foot x 1-foot)
  • 1 VSDP-2466L and VSDP-2466R Roof Sound Damper Clipped Left and Right (both 24-inch x 66-inch)
  • 1 VSDP-2466-1 Sound Damper (24-inch x 66-inch)
  • 1 VSDP-1266-1 Roof Sound Damper (12-inch x 66-inch)
  • 7 VSDP-2224-1 Sound Dampers (22-inch x 24-inch)
  • 1 VDS-FAN Clip-on Fan
  • 1 VAMLS-2 Adjustable Metal Lid Supports (60–96 inches)
  • Perfect for studio settings, and recording drums, amplifiers, and vocals
  • Results in improved isolation, tone preservation, and a cleaner mix overall
  • Heavily insulated dampers keep excess noise to a minimum
  • Deflects high- and mid-frequency content from snares and cymbals
  • Mouse holes are perfect for running mic cables
$ 2868.82

Quantity

X
417

Sound Shields VDS-4X5-K 4 foot Tall 10 foot Wide 5-section Acrylic Shield System

5-panel Acrylic Drum Shield with Cable Cutouts

You can help control drum bleed in a stage, studio, or worship environment using the VDS-4X5-K drum shield by Sound Shields. This 5-piece drum shield is made from interlocking 4-foot x 2-foot (height x width) panels of clear acrylic. These panels effectively deflect mid- to high-frequency drum content from snare drums, cymbals, and hand percussion in a performance setting, helping to diffuse drum sounds throughout a room so they're less direct when they meet your listeners' ears. The VDS-4X5-K can also dramatically improve isolation when used to keep drum sounds from entering vocal microphones in front of the kit, resulting in a cleaner overall mix. Each panel of the Sound Shields VDS-4X5-K drum shield features "mouse holes" for running mic cables through and giving clearance to stand legs. We've found that Sound Shields drum shields also come in handy for taming loud guitar amps and dispersing horn sections onstage or up on the platform. If unwanted bleed is tarnishing your sound, the Sound Shields VDS-4X5-K drum shield can make a world of difference.

Sound Shields VDS-4X5-K 5-panel Drum Shield Features:

  • Helps control instrument bleed in a performance setting
  • Results in improved isolation and a cleaner mix overall
  • Great for drums, amps, horns, and other loud sources
  • Perfect for stage, studio, and worship settings
  • 5 interlocking acrylic panels, each 4 feet tall x 2 feet wide
  • Deflects high- and mid-frequency content from snares and cymbals away from listeners and vocal mics
  • Mouse holes are perfect for running mic cables and clearing stands
$ 469.99

Quantity

X
416

Sound Shields Isolation Booth Lid Pack – VDS-RS1-K

Top off Your Sound Shields Isolation Booth with This Lid Pack!

The Isolation Booth Lid Pack from Sound Shields includes what you need for complementing your current Drum Shields isolation booth setup. This bundle features a set of three sound insulating dampers, including two Roof Sound Dampers measuring 24 inches x 66 inches, one being clipped right and the other clipped left. A middle Sound Damper with the same dimensions is also included, extending the total width of this booth lid to 72 inches. Additionally, you’ll get an Adjustable Metal Lid Support with an extendable range of 60 to 96 inches to ensure the lid of your booth stays in place and is free from unwanted movement while playing.

Sounds Shields Isolation Booth Lid Pack Features:

  • Compatible with your Drum Shields isolation booth setup
  • 1 Adjustable Metal Lid Support (VAMSL-1)
  • 2 Clipped Roof Sound Dampers: 24-inch x 66-inch (VSDP-2466L and VSDP-2466R)
  • 1 Sound Damper: 24-inch x 66-inch (VSDP-2466-1)
$ 388.96

Quantity

X
414

Sound Shields VDS-3-K 5.5 foot Tall 6 foot Wide 3-section Acrylic Shield System

3-panel Acrylic Drum Shield with Cable Cutouts

You can help control drum bleed in a stage, studio, or worship environment using the VDS-3-K drum shield by Sound Shields. This 3-piece drum shield is made from interlocking 5-1/2'H x 2'W panels of clear acrylic to deflect mid to high-frequency drum content (snare drums, cymbals, etc.) in a performance setting. This helps diffuse drum sounds throughout a room so they’re less direct when they meet your listeners’ ears. The VDS-3-K can also dramatically improve isolation when used to keep drum sounds from entering vocal microphones in front of the kit, resulting in a cleaner mix overall. Each panel of the Sound Shields VDS-3-K drum shield features “mouse holes” for running mic cables through and giving clearance to stand legs. We’ve found that Sound Shields drum shields also come in handy for taming loud guitar amps and dispersing horn sections onstage or up on the platform. If unwanted bleed is ruining your sound, the Sound Shields VDS-3-K drum shield can make a world of difference.

Sound Shields VDS-3-K 3-panel Drum Shield Features:

  • Helps control instrument bleed in a performance setting
  • Results in improved isolation and a cleaner mix overall
  • Great for drums, amps, horns, and other loud sources
  • Perfect for stage, studio, and worship settings
  • 3 interlocking acrylic panels, each 5-1/2'H x 2'W
  • Deflects high- and mid-frequency content from snares and cymbals away from listeners and vocal mics
  • Mouse holes are perfect for running mic cables and clearing stands
 
$ 402.99

Quantity

X
413

Sound Shields VDS51-K 5.5 foot Tall 2-foot Wide Single Acrylic Panel

Single Acrylic Drum Shield Panel with Cable Cutout

You can help control drum bleed in a stage, studio, or worship environment using the VDS51-K drum shield panel by Sound Shields. Using the VDS51-K, you can build and expand custom interlocking 5-1/2-foot height by 2-foot wide shields of clear acrylic to deflect mid- to high-frequency drum content (snare drums, cymbals, etc.) in a performance setting. This helps diffuse drum sounds throughout a room so they’re less direct when they meet your listeners’ ears. Shields built with the VDS51-K panel can also dramatically improve isolation when used to keep drum sounds from entering vocal microphones in front of the kit, resulting in a cleaner mix overall. The Sound Shields VDS51-K drum shield panel features a “mouse hole” for running mic cables through and giving clearance to stand legs. We’ve found that Sound Shields drum shields also come in handy for taming loud guitar amps and dispersing horn sections onstage or up on the platform.

Sound Shields VDS51-K Drum Shield Panel (Single) Features:

  • Single 5-1/2-foot H x 2-foot W acrylic panel
  • A key component in your custom-sized drum shield
  • Helps control instrument bleed in a performance setting
  • Results in improved isolation and a cleaner mix overall
  • Great for drums, amps, horns, and other loud sources
  • Perfect for stage, studio, and worship settings
  • Deflects high- and mid-frequency content from snares and cymbals away from listeners and vocal mics
  • Mouse hole is perfect for running mic cables and clearing stands
$ 139.99

Quantity

X
412

Sound Shields Large Isolation Booth Lid Pack – VDS-RS2-K

Top off Your Sound Shields Isolation Booth with This Lid Pack!

The Isolation Booth Lid Pack from Sound Shields includes what you need for complementing your current Drum Shields isolation booth setup. This bundle features a set of four sound insulating dampers, including two Roof Sound Dampers measuring 24 inches x 66 inches, one being clipped right and the other clipped left. Two middle Sound Dampers measuring 24 inches x 66 inches and 12 inches x 66 inches are also included, extending the total width of this booth lid to 84 inches. Additionally, you’ll get two Adjustable Metal Lid Supports with extendable ranges of 60 to 96 inches to ensure the lid of your booth stays in place and is free from unwanted movement while playing.

Sounds Shields Isolation Booth Lid Pack Features:

  • Compatible with your Drum Shields isolation booth setup
  • 2 Adjustable Metal Lid Supports (VAMSL-2)
  • 2 Clipped Roof Sound Dampers: 24-inch x 66-inch (VSDP-2466L and VSDP-2466R)
  • 1 Sound Damper: 24-inch x 66-inch (VSDP-2466-1)
  • 1 Sound Damper: 12-inch x 66-inch (VSDP-1266-1)
$ 514.95

Quantity

X
411

Sound Shields Adjustable Metal Lid Support – VAMLS-1

Sturdy Support Beam for Your Drum Booth Lid

When inside drumming inside an isolation booth, it’s not uncommon for the vibrations of your kit to influence the sturdiness of your surrounding structure. To ensure maximum stability while you play, the Adjustable Metal Lid Support from Sound Shields is what you need. This support beam is constructed of sturdy metal, and has an extendable range of 60 to 96 inches, adapting to drum booths of all shapes and sizes. Outfitted with squared-off flat gripping ends, this beam is stable and will prevent unwanted movement in the lid of your setup. Why take the risk of damaging your equipment, and potentially your own health? Take the safe route and go with Sound Shields!

Sound Shields Adjustable Metal Lid Support Features:

  • Reduces movement in the lid of your drum’s isolation booth
  • Made from strong, sturdy metal construction
  • Flat, squared-off ends ensure reliable horizontal support
  • Adjustability between 60–96 inches to accommodate any setup
$ 29.99

Quantity

X
410

Sound Shields 64 inch VDSH-64HD Friction Hinge for non grooved panels

64-inch Friction Hinge for Drum Shields

Whether you're replacing, expanding, or custom-building the drum shield of your dreams, the Sound Shields VDSH-64HD can play a key role in your creation. This friction hinge joins together two non-grooved drum shield panels from Sound Shields and other brands. At 64 inches tall, it's useful for keeping panels nice and snug together, free from drift during setup and performance.

Sound Shields VDSH-64HD 64-inch Friction Hinge Features:

  • A key component in your custom drum shield
  • Joins together 2 non-grooved drum shield panels
  • Works with Sound Shields drum shield panels and select other brands
$ 14.99

Quantity

X
409

Sound Shields VDS-4X3-K 4 foot Tall 6 foot Wide 3-section Acrylic Shield System

3-panel Acrylic Drum Shield with Cable Cutouts

You can help control drum bleed in a stage, studio, or worship environment using the VDS-4X3-K drum shield by Sound Shields. This 3-piece drum shield is made from interlocking 4-foot x 2-foot (height x width) panels of clear acrylic. These panels effectively deflect mid- to high-frequency drum content from snare drums, cymbals, and hand percussion in a performance setting, helping to diffuse drum sounds throughout a room so they're less direct when they meet your listeners' ears. The VDS-4X3-K can also dramatically improve isolation when used to keep drum sounds from entering vocal microphones in front of the kit, resulting in a cleaner overall mix. Each panel of the Sound Shields VDS-4X3-K drum shield features "mouse holes" for running mic cables through and giving clearance to stand legs. We've found that Sound Shields drum shields also come in handy for taming loud guitar amps and dispersing horn sections onstage or up on the platform.

Sound Shields VDS-4X3-K 3-panel Drum Shield Features:

  • Helps control instrument bleed in a performance setting
  • Results in improved isolation and a cleaner mix overall
  • Great for drums, amps, horns, and other loud sources
  • Perfect for stage, studio, and worship settings
  • 3 interlocking acrylic panels, each 4 feet tall x 2 feet wide
  • Deflects high- and mid-frequency content from snares and cymbals away from listeners and vocal mics
  • Mouse holes are perfect for running mic cables and clearing stands
$ 329.99

Quantity

X
408

Sound Shields VDS-5-78-K 78-inch Tall 5-section Acrylic Shield System

5-panel Acrylic Drum Shield with Cable Cutouts

You can help control drum bleed in a stage, studio, or worship environment using the VDS-5-78-K drum shield by Sound Shields. This 5-piece drum shield is made from interlocking five 78-inch high panels of clear acrylic to deflect mid to high-frequency drum content (snare drums, cymbals, etc) in a performance setting. This helps diffuse drum sounds throughout a room so they're less direct when they meet your listeners' ears. The VDS-5-78-K can also dramatically improve isolation when used to keep drum sounds from entering vocal microphones in front of the kit, resulting in a cleaner mix overall. Each panel of the Sound Shields VDS-5-78-K drum shield features "mouse holes" for running mic cables through and giving clearance to stand legs. We've found that Sound Shields drum shields also come in handy for taming loud guitar amps and dispersing horn sections onstage or up on the platform. Take it from mix engineers at Sweetwater: if unwanted bleed is ruining your sound, the Sound Shields VDS-5-78-K drum shield can make a world of difference.

Sound Shields VDS-5-78-K 5-panel Drum Shield Features:

  • Helps control instrument bleed in a performance setting
  • Results in improved isolation and a cleaner mix overall
  • Great for drums, amps, horns, and other loud sources
  • Perfect for stage, studio, and worship settings
  • 5 interlocking acrylic panels, each 78 inches high
  • Deflects high- and mid-frequency content from snares and cymbals away from listeners and vocal mics
  • Mouse holes are perfect for running mic cables and clearing stands
$ 679.99

Quantity

X
407

Sound Shields VDS-6SPS 6-panel Isolation Booth

Versatile Isolation Booth from Sound Shields

Capturing those pure, undisturbed sounds of your instrument has never been easier, thanks to Sound Shields. Our professional-grade Isolation Booths are designed to not only control instrument projection levels in the studio, but also to preserve all the tones that make your tracks unique when recording — all while eliminating pesky studio rattle and buzz. They work so well because Sound Shields uses high-quality materials to get the job done including custom-cut interlocking acrylic paneling with mouse hole cable cutouts and heavily insulated sound dampers along the walls and roof. And the best part is that Sound Shields offers a variety of different Isolation Booth options, with varying panel and damper combinations to cater to your setup. From tracking drums to guitar amps and vocals, you’ll be amazed by the versatility of your booth.

Sound Shields VDS-6SPS 6-panel Isolation Booth Features:

  • 1 VDS-6-K 6-panel Acrylic Drum Shield
  • 3 VSDP-2466-X2-1 Rear Sound Dampers (24-inch x 66-inch)
  • 1 VDSX122-6 6-panel Drum Extension (12-foot x 1-foot)
  • 1 VSDP-2466L and VSDP-2466R Roof Sound Damper Clipped Left and Right (both 24-inch x 66-inch)
  • 1 VSDP-2466-1 Sound Damper (24-inch x 66-inch)
  • 4 VSDP-2224-1 Sound Dampers (22-inch x 24-inch)
  • 1 VDS-FAN Clip-on Fan
  • 1 VAMLS-1 Adjustable Metal Lid Support (60–96 inches)
  • Perfect for studio settings, and recording drums, amplifiers, and vocals
  • Results in improved isolation, tone preservation, and a cleaner mix overall
  • Heavily insulated dampers keep excess noise to a minimum
  • Deflects high- and mid-frequency content from snares and cymbals
  • Mouse holes are perfect for running mic cables
$ 2388.86

Quantity

X
406

Sound Shields Roof Sound Damper – VSDP-1266-1 – 12-inch x 66-inch

Premium Sound Insulation from Sound Shields

If you’re in need of more sound insulation for your drum shield setup, the Sound Damper from Sound Shields will do the trick! This damper is constructed from heavy sound insulating material that absorbs vibrations and sound waves with ease to keep the noise from your kit to a minimum. This single roof damper has a total measurement of 12 inches x 66 inches, and can be the perfect tool for containing drum noise within your isolation booth.

Sound Shields Roof Sound Damper Features:

  • Ideal as a roof damper for your drum shield
  • Single panel measuring 12 inches x 66 inches (1 per box)
  • Made of heavy sound insulating material to dampen drum noise
  • Call your Sweetwater Sales Engineer to confirm compatibility with your setup
$ 95.99

Quantity

X
405

Sound Shields VDS-6SPS-78 6-panel Isolation Booth with 78-inch Panels

Versatile Isolation Booth from Sound Shields

Capturing those pure, undisturbed sounds of your instrument has never been easier, thanks to Sound Shields. Our professional-grade Isolation Booths are designed to not only control instrument projection levels in the studio, but also preserve all the tones that make your tracks unique when recording — all while eliminating pesky studio rattle and buzz. They work so well because Sound Shields uses high-quality materials to get the job done including custom-cut interlocking acrylic paneling with mouse hole cable cutouts and heavily insulated sound dampers along the walls and roof. And the best part is that Sound Shields offers a variety of different Isolation Booth options, with varying panel and damper combinations to cater to your setup. From tracking drums to guitar amps and vocals, you’ll be amazed by the versatility of your booth.

Sound Shields VDS-6SPS-78 6-panel Isolation Booth Features:

  • 1 VDS-6-78-K 6-panel Drum Shield (78-inch high)
  • 3 VSDP-2466-X2-1 Rear Sound Joined Dampers (24-inch x 66-inch)
  • 1 VSDP-2466L and 1 VSDP-2466R Roof Sound Damper Clipped Left and Right (both 24-inch x 66-inch)
  • 1 VSDP-2466-1 Sound Damper (24-inch x 66-inch)
  • 4 VSDP-2224-1 Sound Dampers (22-inch x 24-inch)
  • 1 VDS-FAN Clip-on Fan
  • 1 VAMLS-2 Adjustable Metal Lid Supports (60–96 inches)
  • Perfect for studio settings, and recording drums, amplifiers, and vocals
  • Results in improved isolation, tone preservation, and a cleaner mix overall
  • Heavily insulated dampers keep excess noise to a minimum
  • Deflects high- and mid-frequency content from snares and cymbals
  • Mouse holes are perfect for running mic cables
$ 2141.84

Quantity

X
403

Sound Shields Rear Sound Joined Dampers – VSDP-2466-X2-1 – 4 feet-x 5.5-feet

Premium Sound Insulation from Sound Shields

If you’re in need of more sound insulation for your drum shield setup, the Sound Damper from Sound Shields will do the trick! This damper is constructed from heavy sound-insulating material that absorbs vibrations and sound waves with ease to keep the noise from your kit to a minimum. It is comprised of two joined dampers in total measuring 4 feet wide and 5.5 feet tall, making it the perfect tool for insulating a lot of sound behind your throne.

Sound Shields Sound Damper Features:

  • Ideal as a rear sound damper panel for your drum shield
  • 2 joined panels in total measuring 4 feet (width) x 5.5 feet (height)
  • Made of heavy sound-insulating material to dampen drum noise
 
$ 243.99

Quantity

X
402

Sound Shields VDS-20DIA-K 20 inch Cymbal Shield with 1/2 inch Hole – CYMBAL AND STAND NOT INCLUDED

Stand-mountable 20" Clear Acrylic Sound Barrier

If you need a little help spot-treating directional cymbals, horns, or combo amps in a live ensemble setting, the VDS-20DIA-K 20" Cymbal Shield from Sound Shields makes a noticeable difference. This 20" clear acrylic disc diffuses and deflects high-frequency content without obscuring sight lines. This means your players stay visible and those piercing crashes, trumpet stabs, and power chords stay out of your vocal mics. What's really great is that the VDS-20DIA-K mounts directly to an open cymbal stand or boom arm. So for drum set applications, the Sound Shields Cymbal Shield remains virtually invisible — just mount an additional cymbal boom off your stand, mount the Cymbal Shield, and you're golden. Looking for reduced stage bleed and a cleaner mix overall? You'll want to check out the Sound Shields VDS-20DIA-K Cymbal Shield.

Sound Shields VDS-20DIA-K 20" Cymbal Shield Features:

  • 20" stand-mountable clear acrylic sound barrier
  • Helps diffuse cymbal sounds
  • Also helps spot-control amps and horns
  • Results in improved isolation and a cleaner mix overall
  • 1/2" center mounting hole — mounts directly to an open cymbal stand or boom arm
  • Great for stage, studio, and worship settings
$ 39.99

Quantity

X
401

Sound Shields Adjustable Metal Lid Support – (2 per Tube) – VAMLS-2

Sturdy Support Beam for Your Drum Booth Lid

When drumming inside an isolation booth, it’s not uncommon for the vibrations of your kit to influence the sturdiness of your surrounding structure. To ensure maximum stability while you play, you need to use the Adjustable Metal Lid Support from Sound Shields. This support beam is constructed of sturdy metal, and has an extendable range of 60 to 96 inches, adapting to drum booths of all shapes and sizes. Outfitted with squared-off flat gripping ends, this beam is stable and will prevent unwanted movement in the lid of your setup. Why take the risk of damaging your equipment, and potentially your own health? Take the safe route and go with Sound Shields!

Sound Shields Adjustable Metal Lid Support Features:

  • 2 per tube included in this pack
  • Reduces play in the lid of your drum’s isolation booth
  • Made from strong, sturdy metal construction
  • Flat, squared-off ends ensure reliable horizontal support
  • Adjustability between 60–96 inches to accommodate any setup
$ 59.99

Quantity

X
400

Sound Shields VDS-5SPS 5-panel Isolation Booth

Versatile Isolation Booth from Sound Shields

Capturing those pure, undisturbed sounds of your instrument has never been easier, thanks to Sound Shields. Our professional-grade Isolation Booths are designed to not only control instrument projection levels in the studio but also preserve all the tones that make your tracks unique when recording — all while eliminating pesky studio rattle and buzz. They work so well because Sound Shields uses high-quality materials to get the job done including custom-cut interlocking acrylic paneling with mouse hole cable cutouts and heavily insulated sound dampers along the walls and roof. And the best part is that Sound Shields offers a variety of different Isolation Booth options, with varying panel and damper combinations to cater to your setup. From tracking drums to guitar amps and vocals, you’ll be amazed by the versatility of your booth.

Sound Shields VDS-5SPS 5-panel Isolation Booth Features:

  • 1 VDS-5-K 5-panel Acrylic Drum Shield; 6 VSDP-2466-1 Sound Dampers (24-inch x 66-inch); 5 VSDP-2224-1 Sound Dampers (22-inch x 24-inch)
  • Perfect for studio settings, and recording drums, amplifiers, and vocals
  • Results in improved isolation, tone preservation, and a cleaner mix overall
  • Heavily insulated dampers keep excess noise to a minimum
  • Deflects high- and mid-frequency content from snares and cymbals
  • Mouse holes are perfect for running mic cables
$ 1617.88

Quantity

X
399

Sound Shields VDSX122-6 6-panel Drum Shield Extension – 12-foot x 1-foot

Quality Acrylic Extension to Your Drum Shield

If you’re looking to add to your drum shield setup, then you should look no further than Sound Shields Drum Shield Extensions! Measuring 12-foot x 1-foot, this 6-panel extension is perfect for when you want to add more height to your drum shield or isolation booth. Like all Sound Shields drum shields, this extension is made from a quality acrylic material that supplies not only a sturdy presence but also superior sound insulation. Additionally, you get hinges for easy attachment to the rest of your drum shield.

Sound Shields 6-panel Drum Shield Extension Features:

  • 6-panel extension measuring 12-foot x 1-foot
  • Perfect for extending the height of your drum shield
  • Made from strong, sound-insulating acrylic material
  • Includes hinges for easy attachment to your setup
$ 239.99

Quantity

X
398

Sound Shields Sound Damper – VSDP-2224-1 – 22-inch x 24-inch

Premium Sound Insulation from Sound Shields

If you’re in need of more sound insulation for your drum shield setup, the Sound Damper from Sound Shields will do the trick! This damper is constructed from heavy sound-insulating material that absorbs vibrations and sound waves with ease to keep the noise from your kit to a minimum. This single damper panel measures 22 inches x 24 inches and can be the perfect tool for expanding your setup.

Sound Shields Sound Damper Features:

  • Ideal insulation panel for your drum shield
  • Single panel measuring 22 inches x 24 inches
  • Made of heavy sound-insulating material to dampen drum noise
$ 53.99

Quantity

X
397

Sound Shields VDSX122-7 7-panel Drum Shield Extension – 14-foot x 1-foot

Quality Acrylic Extension to Your Drum Shield

If you’re looking to add to your drum shield setup, then you should look no further than Sound Shields Drum Shield Extensions! Measuring 14-foot x 1-foot, this 7-panel extension is perfect for when you want to add more height to your drum shield or isolation booth. Like all Sound Shields drum shields, this extension is made from quality acrylic material that supplies not only a sturdy presence but also superior sound insulation. Additionally, you get hinges for easy attachment to the rest of your drum shield.

Sound Shields 7-panel Drum Shield Extension Features:

  • 7-panel extension measuring 14-foot x 1-foot
  • Perfect for extending the height of your drum shield
  • Made from strong, sound-insulating acrylic material
  • Includes hinges for easy attachment to your setup
$ 279.99

Quantity

X
396

Sound Shields VDSX122-5 5-panel Drum Shield Extension – 10-foot x 1-foot

Quality Acrylic Extension to Your Drum Shield

If you’re looking to add to your drum shield setup, then you should look no further than Sound Shields Drum Shield Extensions! Measuring 10-foot x 1-foot, this 5-panel extension is perfect for when you want to add more height to your drum shield or isolation booth. Like all Sound Shields drum shields, this extension is made from quality acrylic material that supplies not only a sturdy presence but also superior sound insulation. Additionally, you get hinges for easy attachment to the rest of your drum shield.

Sound Shields 5-panel Drum Shield Extension Features:

  • 5-panel extension measuring 10-foot x 1-foot
  • Perfect for extending the height of your drum shield
  • Made from strong, sound-insulating acrylic material
  • Includes hinges for easy attachment to your setup
 
$ 199.99

Quantity

X
395

Sound Shields Sound Damper – VSDP-2478-1 – 24-inch x 78-inch

Premium Sound Insulation from Sound Shields

If you’re in need of more sound insulation for your drum shield setup, the Sound Damper from Sound Shields will do the trick! This damper is constructed from heavy sound-insulating material that absorbs vibrations and sound waves with ease to keep the noise from your kit to a minimum. This single damper panel measures 24 inches x 78 inches and can be the perfect tool for expanding your setup.

Sound Shields Sound Damper Features:

  • Ideal as an insulating panel for your drum shield
  • Single panel measuring 24 inches x 78 inches (1 per box)
  • Made of heavy sound-insulating material to dampen drum noise
$ 151.99

Quantity

X
394

Sound Shields Sound Damper – VSDP-2444-1 – 24-inch x 44-inch

Premium Sound Insulation from Sound Shields

If you’re in need of more sound insulation for your drum shield setup, the Sound Damper from Sound Shields will do the trick! This damper is constructed from heavy sound-insulating material that absorbs vibrations and sound waves with ease to keep the noise from your kit to a minimum. This single damper panel measures 24 inches x 44 inches and can be the perfect tool for expanding your setup.

Sound Shields Sound Damper Features:

  • Ideal as insulation panel for your drum shield
  • Single panel measuring 24 inches x 44 inches (1 per box)
  • Made of heavy sound-insulating material to dampen drum noise
$ 95.99

Quantity

X
393

Sound Shields 76-inch VDSH-76HD Friction Hinge

Replacement Hinge for Your Sound Shields Panel

Measuring 76 inches, this replacement hinge is compatible with other non-grooved 76-inch Sound Shields isolation booth and drum shield acrylic panels.

Sound Shields 76-inch Friction Hinge Features:

  • 76 inches in length
  • Compatible with other Sound Shields Drum Shields and isolation booth acrylic panels
  • Use on non-grooved panels only
  • Ideal as a replacement or backup piece for your setup
$ 16.99

Quantity

X
389

Sound Shields Extension Sound Damper – VSDP-1224-X2-1 – 4-foot x 1-foot

Premium Sound Insulation from Sound Shields

If you’re in need of more sound insulation for your drum shield setup, the Sound Damper from Sound Shields will do the trick! This damper is constructed from heavy sound insulating material that absorbs vibrations and sound waves with ease to keep the noise from your kit to a minimum. It is comprised of two joined dampers for a total measurement of 4 feet x 1 foot, making it the perfect tool for adding some height to your setup.

Sound Shields Extension Sound Damper Features:

  • Ideal as a height extension for your drum shield
  • 2 joined panels in total measuring 4 feet x 1 foot
  • Made of heavy sound insulating material to dampen drum noise
$ 104.99

Quantity

X
388

Sound Shields Sound Damper – VSDP-2216-1 – 22-inch x 16-inch

Premium Sound Insulation from Sound Shields

If you’re in need of more sound insulation for your drum shield setup, the Sound Damper from Sound Shields will do the trick! This damper is constructed from heavy sound-insulating material that absorbs vibrations and sound waves with ease to keep the noise from your kit to a minimum. This single panel has a measurement of 22 inches x 16 inches and can be the perfect tool for expanding your setup.

Sound Shields Sound Damper Features:

  • Ideal insulation panel for your drum shield
  • Single panel measuring 22 x 16 inches (1 per box)
  • Made of heavy sound-insulating material to dampen drum noise
$ 52.99

Quantity

X
21

Sound Shields Sound Damper – VSDP-2233-1 – 22-inch x 33-inch

Premium Sound Insulation from Sound Shields

If you’re in need of more sound insulation for your drum shield setup, the Sound Damper from Sound Shields will do the trick! This damper is constructed from heavy sound-insulating material that absorbs vibrations and sound waves with ease to keep the noise from your kit to a minimum. This single damper panel measures 22 inches x 33 inches and can be the perfect tool for expanding your setup.

Sound Shields Sound Damper Features:

  • Ideal sound insulation panel for your drum shield
  • Single panel measuring 22 inches x 33 inches
  • Made of heavy sound insulating material to dampen drum noise
$ 84.99

Quantity

X
20

Sound Shields VDS-MPS 11-panel Isolation Booth

Versatile Isolation Booth from Sound Shields

Capturing those pure, undisturbed sounds of your instrument has never been easier, thanks to Sound Shields. Our professional-grade Isolation Booths are designed to not only control instrument projection levels in the studio, but also preserve all the tones that make your tracks unique when recording — all while eliminating pesky studio rattle and buzz. They work so well because Sound Shields uses high-quality materials to get the job done including custom-cut interlocking acrylic paneling with mouse hole cable cutouts and heavily insulated sound dampers along the walls and roof. And the best part is that Sound Shields offers a variety of different Isolation Booth options, with varying panel and damper combinations to cater to your setup. From tracking drums to guitar amps and vocals, you’ll be amazed by the versatility of your booth.

Sound Shields VDS-MPS 11-panel Isolation Booth Features:

  • 1 VDS-6-K 6-panel Drum Shield
  • 1 VDS-5-K 5-panel Drum Shield
  • 1 VDSX122-6 6-panel Drum Extension (12-foot x 1-foot)
  • 1 VDSX122-5 5-panel Drum Extension (10-foot x 1-foot)
  • 5 VSDP-2478-1 Sound Dampers (24-inch x 78-inch)
  • 1 VSDP-2466L and VSDP-2466R Roof Sound Damper Clipped Left and Right (both 24-inch x 66-inch)
  • 1 VSDP-2466-1 Sound Damper (24-inch x 66-inch)
  • 1 VSDP-1266-1 Roof Sound Damper (12-inch x 66-inch)
  • 2 VSDP-2444-1 Sound Dampers (24-inch x 44-inch)
  • 4 VSDP-2224-1 Sound Dampers (22-inch x 24-inch)
  • 1 VDS-FAN Clip-on Fan
  • 1 VAMLS-2 Adjustable Metal Lid Supports (60–96 inches)
  • Perfect for studio settings, and recording drums, amplifiers, and vocals
  • Results in improved isolation, tone preservation, and a cleaner mix overall
  • Heavily insulated dampers keep excess noise to a minimum
  • Deflects high- and mid-frequency content from snares and cymbals
  • Mouse holes are perfect for running mic cables
$ 3580.79

Quantity

X
19

Sound Shields VVS-6PS 6-panel Vocal Isolation Booth

Versatile Isolation Booth from Sound Shields

Capturing those pure, undisturbed sounds of your instrument has never been easier, thanks to Sound Shields. Our professional-grade Isolation Booths are designed to not only control instrument projection levels in the studio, but also to preserve all the tones that make your tracks unique when recording — all while eliminating pesky studio rattle and buzz. They work so well because Sound Shields uses high-quality materials to get the job done including custom-cut interlocking acrylic paneling with mouse hole cable cutouts and heavily insulated sound dampers along the walls and roof. And the best part is that Sound Shields offers a variety of different Isolation Booth options, with varying panel and damper combinations to cater to your setup. From tracking drums to guitar amps and vocals, you’ll be amazed by the versatility of your booth.

Sound Shields VVS-6PS 6-panel Vocal Isolation Booth Features:

  • 1 VDS-6-K 6-panel Drum Shield
  • 2 VSDP-2466-X2-1 Rear Sound Joined Dampers (24-inc x 66-inch)
  • 1 VDSX122-6 6-panel Drum Extension (12-foot x 1-foot)
  • 1 VSDP-2466L and VSDP-2466R Roof Sound Damper Clipped Left and Right (both 24-inch x 66-inch)
  • 1 VSDP-2466-1 Sound Damper (24-inch x 66-inch)
  • 6 VSDP-2444-1 Sound Dampers (24-inch x 44-inch)
  • 1 VDS-FAN Clip-on Fan
  • 1 VAMLS-1 Adjustable Metal Lid Support (60–96 inches)
  • Perfect for studio settings, and recording drums, amplifiers, and vocals
  • Results in improved isolation, tone preservation, and a cleaner mix overall
  • Heavily insulated dampers keep excess noise to a minimum
  • Deflects high- and mid-frequency content from snares and cymbals
  • Mouse holes are perfect for running mic cables
$ 2504.85

Quantity

X
17

Sound Shields VDS-MPS-78 11-panel Isolation Booth with 78-inch Panels

Versatile Isolation Booth from Sound Shields

Capturing those pure, undisturbed sounds of your instrument has never been easier, thanks to Sound Shields. Our professional-grade Isolation Booths are designed to not only control instrument projection levels in the studio, but also preserve all the tones that make your tracks unique when recording — all while eliminating pesky studio rattle and buzz. They work so well because Sound Shields uses high-quality materials to get the job done including custom-cut interlocking acrylic paneling with mouse hole cable cutouts and heavily insulated sound dampers along the walls and roof. And the best part is that Sound Shields offers a variety of different Isolation Booth options, with varying panel and damper combinations to cater to your setup. From tracking drums to guitar amps and vocals, you’ll be amazed by the versatility of your booth.

Sound Shields VDS-MPS-78 11-panel Isolation Booth Features:

  • 1 VDS-6-78-K 6-panel Drum Shield (78-inch high)
  • 1 VDS-5-K 5-panel Drum Shield
  • 5 VSDP-2478-1 Sound Dampers (24-inch x 78-inch)
  • 1 VSDP-2466L and VSDP-2466R Roof Sound Damper Clipped Left and Right (both 24-inch x 66-inch)
  • 1 VSDP-2466-1 Sound Damper (24-inch x 66-inch)
  • 1 VSDP-1266-1 Roof Sound Damper (12-inch x 66-inch)
  • 2 VSDP-2444-1 Sound Dampers (24-inch x 44-inch)
  • 4 VSDP-2224-1 Sound Dampers (22-inch x 24-inch)
  • 1 VDS-FAN Clip-on Fan
  • 1 VAMLS-2 Adjustable Metal Lid Supports (60–96 inches)
  • Perfect for studio settings, and recording drums, amplifiers, and vocals
  • Results in improved isolation, tone preservation, and a cleaner mix overall
  • Heavily insulated dampers keep excess noise to a minimum
  • Deflects high- and mid-frequency content from snares and cymbals
  • Mouse holes are perfect for running mic cables
$ 3163.81

Quantity